Minggu, 17 Januari 2016

Multimac

MULTIMAC

13MULTIMAC®

The versatile new MultiMac® lets you configure your eddy current test application the way you want – all with just one tester. MultiMac® test channels can be individually configured for use with encircling or sector test coils as well as rotating test probes – eliminating the need to have several instruments.
Yet MultiMac includes the best features of MAC’s individual encircling coil and rotary probe instruments. Features include up
to 8 test channels in any combination, and a broad test frequency selection from 1KHz to 5MHz. All test channels can operate simultaneously at the same or at different frequencies
MultiMac® can operate on a wide variety of non-magnetic products, or use Direct Current saturation systems to inspect magnetic material. Test speeds can range from one foot per minute up to several thousand. Installation can be in-line or at a separate test station. End suppression circuitry, when combined with an optional sensor can be used for testing cut lengths to prevent false signals from leading and trailing ends.
The instrument is packaged in a heavy duty cabinet that includes a built-in monitor, air conditioning, and pull- out keyboard. There is no need to access the cabinet interior during setup and operation.
The MultiMac® is also available in other cabinet configurations that do not include the heavy duty cabinet and built-in monitor. These models include output connectors for an external monitor, and can be housed in an environmental cabinet with air conditioning where needed.

Typical Application:
  • Defect detection in non-magnetic and magnetic bar, wire, or tube where multiple test channels and both encircling and rotary probe technology is desirable.
PDF File:  MULTIMAC.pdf
For Use With: Bars and Rods, Tubing, Wire

MULTIMAC®

12The MultiMac® SM is a high speed, computer with Windows® Operating System and MAC’s latest proprietary software. The instrument is packaged in a compact cabinet that includes a built-in touch screen monitor and may also be operated with a keyboard or mouse. The output connectors are included for an optional external monitor.With these features, MultiMac® SM can operate on a wide variety of non-magnetic products, or use Direct Current saturation systems to inspect magnetic material.The system has a broad test frequency selection from 1KHz to 5MHz. Test speeds can range from one foot per minute up to several thousand. Installation can be in-line or at a separate test station.MultiMac® SM has up to 4 test channels that can operate at the same or different frequencies for special applications. The main test display provides all the information needed to set up and operate MultiMac® SM. Polar and linear signal traces can be simultaneously displayed, along with all test parameters. User configurable reports containing customer and product information in addition to defect location, time, amplitude and phase can be stored locally or on a network server.
 Typical Application:
  • To detect short weld line defects, and long, continuous surface flaws such as laps and seams in magnetic and non-magnetic tube and bar.
PDF File: MULTIMAC SM.pdf
For Use With: Bars and Rods, Tubing

0 komentar:

luvne.com resepkuekeringku.com desainrumahnya.com yayasanbabysitterku.com

Posting Komentar